NASA STTR 2020-I Solicitation

Proposal Summary

 20-1- T6.05-6533
 Testing of COTS Systems in Space Radiation Environments
 Radiation Modeling of COTS Power Converters in a Highly Shield Space Environment
Busek Company, Inc.
11 Tech Circle
Natick MA  01760 - 1023
Phone: (508) 655-5565
Vanderbilt University
1025 16th Ave South, STE 200
TN  37212
Phone: (615) 343-8833

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)

Yu-Hui Chiu
11 Tech Circle Natick, MA 01760 - 1023
(508) 655-5565

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)

Judy Budny
11 Tech Circle Natick, MA 01760 - 1023
(508) 655-5565
Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 4
Technical Abstract (Limit 2000 characters, approximately 200 words)

Commercial off-the-shelf (COTS) electronics systems operated in highly-shielded enclosures (HSE) will all require power supplies or DC/DC converters to power the signal processing electronics.  Most power supplies are based on switching converters that require power transistors, diodes, gate drivers, and control ICs that regulate the power. These components in a COTS assembly will all be unhardened commercial components that are sensitive to single event effects (SEE).  Our objective is to develop the tools to predict which of these components are capable of tolerating the SEE and later validate the tools by experiments.

Inside an HSE in space, the residual particle spectrum after filtering the space heavy-ion environment will consist of neutrons, protons, and alpha particles. These particles, when incident on a semiconductor device can produce secondary ion species through collisions, resulting in short-range energetic ions that can cause single-event effects. Consequently, the question addressed in the proposed work is whether commercial power converters can tolerate the secondary ion effects that will occur when operated in a highly-shielded environment.

Busek and Vanderbilt University propose to use radiation transport modeling to determine the particle spectrum inside packaging enclosures and the result of the particles in the interior package environment impinging on semiconductor devices and producing secondary ions. We will calculate the spectrum of the secondary ions in Phase I. We will support the modeling with a low-energy ion test on representative components with a low-cost ion beam to find experimentally their sensitivities to the secondary ions.

In Phase II, a high-energy accelerator heavy-ion test will be conducted with the calculated secondary ion spectrum as a proxy test.  We will also seek opportunities to demonstrate a COTS DC/DC converter in HSE such as the International Space Station as a validation of the modeling approach and prediction.

Potential NASA Applications (Limit 1500 characters, approximately 150 words)

NASA plans many missions that require human presence living in habitats that are substantially free of ionizing radiation.  However, no habitat can block high energy galactic particles or heavy high energy ions.  Hence all EEE parts in such habitat must be SEE tolerant.  Conventional rad hard EEE parts are very costly, less capable, and advanced chips ubiquitous in terrestrial applications don’t exist for space applications.  When SEE tolerant COTS power converters are available they will proliferate thought-out the space industry.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

SEE tolerant COTS power converters would bring dramatic cost benefits to DoD missions and commercial spacecraft industry.  While most ionizing radiation can be effectively shielded, no amount of shielding material can block high energy particles. When combined with effective radiation shielding, SEE tolerant COTS power converters would significantly reduce the costs for all commercial missions.

Duration: 13

Form Generated on 06/29/2020 21:15:34