NASA SBIR 2020-I Solicitation

Proposal Summary


PROPOSAL NUMBER:
 20-1- Z4.05-5141
SUBTOPIC TITLE:
 Nondestructive Evaluation (NDE) Sensors, Modeling, and Analysis
PROPOSAL TITLE:
 Ultrasonic Bessel Beams for Inspection of Multilayered Structures and Attenuative Material Systems
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Advent Innovations Limited
1225 Laurel Street, Suite 213
Columbia, SC 29201
(480) 234-5267

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)

Name:
Shawn Beard
E-mail:
shawnb@adventinnous.com
Address:
12 Sequoia St. Bishop, CA 93514 - 9420
Phone:
(408) 230-0502

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)

Name:
Ritubarna Banerjee PhD
E-mail:
Ritubarna@adventinnous.com
Address:
1225 Laurel Street, Suite 213 Columbia, SC 29201 - 5826
Phone:
(480) 234-5267
Estimated Technology Readiness Level (TRL) :
Begin: 2
End: 4
Technical Abstract (Limit 2000 characters, approximately 200 words)

NASA is developing new spacecraft for human spaceflight. These spacecraft will utilize a variety of material systems, and many of the components are targeted for reusability and long-term use. This offers many challenges, not only for design and manufacturing, but also for inspection and maintenance. For example, inspection of thermal protection systems (TPS), bondlines, or multilayered structures using traditional nondestructive evaluation (NDE) is time consuming, expensive, and often not possible when access is limited (e.g. covered by TPS). All conventional NDE methods have significant limitations in evaluating conditions beneath attenuative TPS material, making inspection of the bondline very challenging. To inspect the bondline between the TPS and the composite substrate, a mechanical wave such as ultrasound is necessary. However, TPS materials are highly attenuative to conventional ultrasound waves. An opportunity exists to meet this challenge by utilizing non-diffracting ultrasonic Bessel Beams that resist attenuation.

 

In this project, it is proposed to develop an NDE technique to inspect carbon fiber composite substrates and bondlines beneath attenuative TPS material. A comparatively new approach using a Restorative Ultrasonic Bessel Beam Yielding (RUBY) method is proposed to perform NDE using an ad-hoc metastructure with multi-stage acoustic axicons in-front of the transducer to create self-healing ultrasonic Bessel Beams that focus the wave energy without being affected by the attenuative layer. Bessel Beams are a special class of beams that resist diffraction and, in some cases, attenuation up to a certain distance (depth of field). The objective of the project is to develop a system capable of generating nondiffracting beams that resist the loss effects and maintain amplitude and spot size of their central core for long distances, suitable for inspection beneath thick attenuative layers.

Potential NASA Applications (Limit 1500 characters, approximately 150 words)

It is anticipated that the first application of the technology will be the integration into NASA’s inspection tools for TPS material such as the Orion heat shield, followed by applications for multi-wall composite pressure vessels, additively manufacture components, and inspection beneath thick protective coatings. As NASA continues to direct efforts into deep space flight, novel inspection systems, such as RUBY, will be needed to provide mission critical information of the structure’s status.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

Non-NASA applications include large, commercial space launch vehicles. Other non-NASA applications include military/commercial aircraft structures that use thick protective coatings. In addition to structural inspection, transmitting ultrasonic Bessel Beams through attenuative layers of skull, muscle, and skin would enable faster, safer, and cheaper biomedical imaging capabilities.

Duration: 6

Form Generated on 06/29/2020 21:04:03