NASA SBIR 2020-I Solicitation

Proposal Summary


PROPOSAL NUMBER:
 20-1- S1.08-4689
SUBTOPIC TITLE:
 Suborbital Instruments and Sensor Systems for Earth Science Measurements
PROPOSAL TITLE:
 Field-Deployable Beam Mapping Calibration System
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Droplet Measurement Technologies, LLC
2400 Trade Ctr Ave
Longmont, CO 80503
(303) 440-5576

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)

Name:
Dr. Duncan Axisa
E-mail:
daxisa@dropletmeasurement.com
Address:
2400 Trade Ctr Ave Longmont, CO 80503 - 7600
Phone:
(303) 440-5576

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)

Name:
Kristie Stowers
E-mail:
kstowers@dropletmeasurement.com
Address:
2400 Trade Ctr Ave Longmont, CO 80503 - 7600
Phone:
(720) 633-8814
Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 6
Technical Abstract (Limit 2000 characters, approximately 200 words)

Cloud optical particle counters (OPCs) count and size particles transiting a sensitive laser region (the sample area) to provide information required to better understand cloud processes and validate models and satellite retrievals. Cloud OPC sizing uncertainty varies from instrument-to-instrument and depends on the transit location with the sample area. Sample area dimensions must be known for calculations of higher-order products and are unique for each probe due to manufacturing tolerances. Cloud OPC sizing performance is commonly evaluated by passing precision glass beads through an instrument’s sample area. The number and transit location of glass beads is unknown, so the method cannot be used to provide position-dependent sizing uncertainty assessments or provide measurements of sample area dimensions. Researchers have developed beam mapping systems that test OPCs by passing a known number of water droplets through the sample area at known locations. Beam mapping systems can provide detailed assessments of sizing uncertainty and precise measurements of sample area dimensions. Seven groups (including Droplet Measurement Technologies) operate beam mapping systems that are immobile and too complex to easily relocate. These systems cannot be feasibly deployed during field campaigns, where detailed assessments of OPC sizing performance and sample area dimensions are highly desirable. This proposal seeks funding for the development of a miniaturized field-deployable beam mapping system which would evolve into a commercially-available product. The work has the potential to greatly increase the availability of state of the art OPC calibration systems that are small/simple enough to be operated during field deployments. The proposed work will also develop a novel method for performing detailed sizing calibrations using information provided by the prototype system. The work addresses the S1.08 subject within Focus Area 9 by improving confidence in cloud measurements.

Potential NASA Applications (Limit 1500 characters, approximately 150 words)

The proposed innovation has potential applications within the NASA Langley and Glenn research centers. The innovation would enable NASA researchers to produce instrument specific assessments of cloud optical particle counter performance and perform detailed sizing calibrations in both the laboratory and during field campaigns. The innovation is a major improvement over commonly-used glass bead tests that only give general assessments of sizing performance (not calibrations).

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

The proposed innovation would give groups operating cloud optical particle counters a means to improve confidence in their measurements. A variety of organizations including those focusing on atmospheric research, operational weather modification, and aircraft icing certification could benefit from the proposed deliverables.

Duration: 6

Form Generated on 06/29/2020 21:05:44