NASA STTR 2018-I Solicitation

Proposal Summary

 18-1- T12.01-7112
 Thin-Ply Composite Technology and Applications
 Ultra-Thin Ply Formable Material from Reusable Short Carbon Fiber Composites
Name:   Composites Automation, LLC
Name:   University of Delaware
Street:  9 Adelaide Court
Street:  210 - E Hullihen Hall
City:   Newark
City:   Newark
State/Zip:  DE  19702-
State/Zip:   DE 19716 - 0000
Phone:  (302) 584-4184
Phone:   (302) 831-8626

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Roger Crane
9 Adelaide Court Newark, DE 19702 - 2068
(410) 562-2163

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dirk Heider
9 Adelaide Court Newark, DE 19702
(302) 831-8898
Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 5
Technical Abstract

This project develops an ultra-thin and formable prepreg material from reusable short carbon fiber composites (CFC), including process and material development, test panel fabrication and mechanical performance evaluation. Key to superior performance of ultra-thin ply materials is the ability to fabricate high fiber volume and uniform fiber distribution prepreg with low void content and layer thicknesses ≤20μm. Our prepreg is made from short, aligned carbon fiber (CF) sheets and polymer film impregnation. We have demonstrated successful fabrication of 30gsm areal weight fabric material and recently proved ultra-thin ply prepreg impregnation with a low areal weight polymer film. The process is unique as it is not relying on spreading of large fiber tows but assembles individual short fibers creating better control of fiber content and thickness uniformity. The materials can be processed using conventional autoclave with mechanical properties equivalent to continuous CFC.

Key advantages of short CF thin-ply material compared to traditional continuous prepreg are the lower variability of the microstructure, the ability of in-plane stretching of short CFCs, the ability to hybridize at the fiber level and to reclaim the CF material for fabrication of new high-performance parts or as feedstock for additive manufacturing processes. The Phase I will demonstrate high-quality thin-ply uni and QI prepregs made from short CFs and a potential Phase II will consider evaluation of the multi-functional aspect of the material including hybridization, improved processability and recovery of short CFCs.

Potential NASA Applications

NASA has shown interest in applying thin-ply technology in various programs. The approach has the potential to reduce cost by 25% and weight by 30 percent compared to existing aluminum-lithium propellant tanks. Minimum weight solutions and the potential for material reuse with thin-ply are critical for deep-space habitation structures. The thin-ply technology also allows minimum gauge and hybrid designs for space suits optimizing mass efficiency.

Potential Non-NASA Applications

The general approach and specific technologies developed in this STTR can also be applied to other military platforms and commercial applications (aerospace, automotive, wind etc). These applications may require additional material testing and R&D to meet certifications and particular application requirements.

Form Generated on 05/25/2018 11:56:31