NASA SBIR 2018-II Solicitation

Proposal Summary


PROPOSAL NUMBER:
 18-2- Z2.01-9202
PHASE 1 CONTRACT NUMBER:
 80NSSC18P2187
SUBTOPIC TITLE:
 Thermal Management
PROPOSAL TITLE:
 Variable View Factor Two-Phase Radiator
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Advanced Cooling Technologies, Inc.
1046 New Holland Avenue
Lancaster, PA 17601
(717) 205-0602

PRINCIPAL INVESTIGATOR (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Srujan Rokkam
srujan.rokkam@1-act.com
1046 New Holland Avenue
Lancaster, PA 17601 - 5688
(717) 205-0648

BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
William Anderson
Bill.Anderson@1-act.com
1046 New Holland Avenue
Lancaster, PA 17601 - 5688
(717) 205-0602

Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 5
Technical Abstract (Limit 2000 characters, approximately 200 words)

The proposed program will develop a novel Vapor-Pressure-Driven Variable-View-Factor Radiator that is deployable, operates with variable geometry (i.e., form factor) and offers high turndown ratio. The device utilizes two-phase heat transfer and novel geometric features that adaptively (and reversibly) adjust the view factor in response to internal pressure in the radiator. The radiator folds into a closed shape to minimize the view factor when cold, and opens up to maximize the view factor when heated. Prototypes demonstrated in Phase I prove the feasibility and highlight the advantages of a two-phase radiator over shape memory alloy technologies.  Structural and thermal simulation studies confirmed the viability of the concept.

At low temperatures, the view factor of emissive surfaces of the radiator to the heat sink is near zero, so the only heat lost is that which is emitted from the insulated outer surfaces of the radiator. The flexible section of the radiator is an elastic envelope enclosing a saturated working fluid. When the temperature of the radiator increases, the corresponding increase in vapor pressure generates a net force on the interior walls of the envelope which causes the elastic walls to bend so that the structure opens and the view factor increases. The increase in view factor reduces thermal resistance of heat rejection which enables inherently passive thermal control. Additionally, the entire structure of the radiator consists of cavities filled with saturated fluid acting like heat pipes, so the radiating surface will be nearly isothermal, achieving a radiator panel efficiency near one. In Phase I, modeling and prototyping indicates that the baseline geometry proposed can achieve a thermal turndown ratio of 37:1.

Potential NASA Applications (Limit 1500 characters, approximately 150 words)

The NASA roadmap is looking for radiators with turn-down capabilities greater than 10:1 The proposed vapor pressure driven variable view factor radiator shows great potential in advanced spacecraft thermal control by reducing the complexity and cost of variable view factor radiators. The program will demonstrate the feasibility of modeling, designing, optimizing and manufacturing of such adaptive radiator. Manned missions, satellites, and deep space missions can all benefit from this innovation.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

This deployable radiator is useful for spacecraft thermal control, including military or commercial satellite applications that may work with large variations in power and/or external sink conditions. The device can be easily designed to be used as a thermal control component for other applications including: solar flaps, variable geometry chevrons and slat-cove fillers onboard transport aircraft.

Duration: 24

Form Generated on 05/13/2019 13:34:12