NASA SBIR 2018-I Solicitation

Proposal Summary


PROPOSAL NUMBER:
 18-1- S1.01-6042
SUBTOPIC TITLE:
 Lidar Remote Sensing Technologies
PROPOSAL TITLE:
 Dual Pulsed Pump Laser for Trace Gas Detection
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Fibertek, Inc.
13605 Dulles Technology Drive
Herndon , VA 20171-4603
(703) 471-7671

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Floyd Hovis
fhovis@fibertek.com
13605 Dulles Technology Drive Herndon, VA 20171 - 4603
(703) 471-7671

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)
Tracy Perinis
tperinis@fibertek.com
13605 Dulles Technology Drive Herndon, VA 20171 - 4603
(703) 471-7671
Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 4
Technical Abstract

Fibertek proposes to develop a novel space-qualifiable, double pulse 1064 nm laser and related technologies for use as a pump laser in airborne and space-based trace gas lidar remote sensing systems. The goal is an injection seeded laser system with two closely spaced (~100-200 µs), 600 mJ pulses at 50 Hz that is an innovative synthesis of both new and recently developed Fibertek technologies. The primary application of this dual pulse system is for use as a pump laser in Differential Absorption Lidar systems that require one pulse that is in resonance with the molecular species being detected and one that is off resonance. For the pump laser we will develop, the two pulses need to be closely spaced in time so they sample essentially the same atmospheric aberrations. These performance goals exceed the requirements for pulsed lasers in the 20 Hz to 100 Hz repetition rate range with energies greater than 100 mJ that is identified in the 2018 SBIR subtopic S1.01, Lidar Remote Sensing Technologies. The combination of high pulse energy, dual-pulse injection seeded format, and pure conductive cooling makes these state of the art design goals. This technology could be the pump source for optical parametric oscillators (OPOs) and other wavelength converters needed for lidar based remote detection of key of atmospheric gases including methane, ozone, and water vapor. The design will advance the state of the art in laser performance by decreasing the size by 2x and increasing the efficiency by over 80% in a purely conductively cooled package needed for space-based applications compared to other recently developed systems.

Potential NASA Applications

Two major limiters of lidar remote sensing systems are the size and power consumption of the laser transmitter. The high-efficiency, compact MOPA we will develop can significantly reduce the size and weight of a space-qualifiable laser that can be the pump transmitter for airborne and space-based lidar measurements including:

1) Ozone DIAL systems

2) Water vapor and methane DIAL systems

3) Next-generation cloud, aerosol, and ocean lidar systems

4) Direct detection wind measurement systems.

Potential Non-NASA Applications

There is a significant commercial interest in the high-efficiency, compact laser being proposed. The applications include 1) as an upgrade to Optical Autocovariance Wind Lidar (OAWL) system and 2) as the transmitter needed for wind lidar used by DoD for precision air drop missions. The higher energy, higher efficiency, and reduced size of the laser transmitter will improve the efficiency, reduce the size, and extend the range and applicability of both types of systems.


Form Generated on 05/25/2018 11:33:54