NASA SBIR 2018-I Solicitation

Proposal Summary

 18-1- H5.02-3743
 Hot Structure Technology for Atmospheric Entry Vehicles
 Polymer Derived Ceramic Based Structural Thermal Protection Systems for Atmospheric Entry Vehicles
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Sporian Microsystems, Inc.
515 Courtney Way, Suite B
Lafayette , CO 80026-8821
(303) 516-9075

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)
Alexis Jensen
515 Courtney Way, Suite B Lafayette, CO 80026 - 8821
(303) 516-9075

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)
Kevin Harsh
515 Courtney Way, Suite B Lafayette, CO 80026 - 8821
(303) 516-9075
Estimated Technology Readiness Level (TRL) :
Begin: 4
End: 6
Technical Abstract

The development of robust and efficient Entry, Descent and Landing systems fulfill the critical function of delivering payloads to planetary surfaces through challenging environments. Future NASA missions will require new technologies to further space exploration and delivery of high mass loads. Of particular interest is the development of reusable hot structure technologies for primary structures exposed to extreme heating environments on atmospheric entry vehicles. A hot structure system is a multifunctional structure that can reduce/eliminate the need for a separate thermal protection system. Thus, there is a need for the development of new technologies to support the realization of low-cost, durable/reusable hot structures applicable to atmospheric entry vehicles.  A key barrier is the requirement for the lightweight form to not only carry mechanical loads but also accommodate high temperatures (1000-2200°C), severe transient heating, and temperature gradients through the thickness.  Novel materials and associated fabrication processes are needed to balance the demand for structural cohesiveness with desired thermal properties required to protect structure interiors.  Sporian Microsystems has developed advanced ceramic materials for harsh environments with a particular focus on materials technologies based on ultra-high temperature polymer derived silicon carbonitride (SiCN).  The long-term objective of this proposed work is to heavily leverage prior preceramic precursor based insulating materials development, and revise processes that can be used to realize hot structure systems.  The PhI effort will focus on assessing candidate processes and SiCN precursor formulation to create relevant load-bearing, insulating structures, then demonstrating technical feasibility by producing and testing hot structure samples. If successful, Sporian will be well prepared for Phase II efforts focused on producing demo units for NASA testing and addressing vehicle integration.

Potential NASA Applications

Thermally/mechanically high temp stable hot structures have many NASA applications due to their ability to improve weight/size, performance of atmospheric entry vehicles, or any vehicle exposed to harsh environments/hypersonic loads. Impacting programs such as HyperX, X-37, Mars Astrobiology Explorer Cacher, Jupiter Europa Orbiter, Uranus Orbiter, and Mars Trace Gas Orbiter, facilitating NASA objectives such as ERA, Advanced Air Vehicles Program, Vehicle Systems Safety Technology, and many more.

Potential Non-NASA Applications

Similar to NASA applications, this insulation materials can be used for Department of Defense hypersonic vehicles, missiles, and rockets for programs such as HAWC, HSSW, Falcon Project, HyRAX, Tactical Boost Glide, Boeing Minuteman, Lockheed Martin Trident, Boeing X-51 Waverider, Raytheon SM-3, and other long range stand-off applications. Outside of DoD, applications include oil refineries, power generation structures, incinerators, glass fabrication, degassers, and tundishes to name a few.

Form Generated on 05/25/2018 11:29:48