NASA SBIR 2017 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 171 Z11.01-9067
SUBTOPIC TITLE: NDE Sensors
PROPOSAL TITLE: Microwave-Interrogated Embedded Sensor System for Nondestructive Evaluation (NDE) of Complex Structures

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Makel Engineering, Inc.
1585 Marauder Street
Chico, CA 95973 - 9064
(530) 895-2771

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Darby Makel
dmakel@makelengineering.com
1585 Marauder Street
Chico, CA 95973 - 9064
(530) 895-2771

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Darby Makel
dmakel@makelengineering.com
1585 Marauder Street
Chico, CA 95973 - 9064
(530) 895-2771

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 3
End: 4

Technology Available (TAV) Subtopics
NDE Sensors is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
Makel Engineering, Inc. and Lawrence Livermore National Lab propose to develop a new class of microwave-interrogated embedded sensors for nondestructive evaluation (NDE) of complex structures. Three-dimensional sensors will be formed by additive manufacturing technology and will employ advanced sensing materials for accurate measurement of structural integrity. Microwaves are a particularly effective and versatile probe for complex structures because they readily penetrate a wide range of solid materials. At the highest frequencies (~100 GHz), wavelengths can approach the 1 mm scale, allowing for the possibility of sub-millimeter embedded sensor size, since resonant features can be scaled smaller than the interrogating wavelength. Structural health can therefore be unobtrusively measured and mapped from locations distributed over a defined volume of material or over a wide area.

A potential issue associated with any physical sensor is the size of the sensor relative to the minimum dimensions of the structures being measured. Our team can develop microwave-interrogated sensors with diameters smaller than 1 mm that can be embedded in structures. Electrically small 3D antennas coupled with capacitive or piezoresistive materials are embedded structural component. The passive antennas are interrogated by sweeping frequencies in the microwave range. Pressure and temperature changes in the system are observed by the corresponding changes in resonant frequency of the antenna due to capacitance changes in the sensor material, and captured by the reflected energy spectra. The sensor in each node has a unique characteristic frequency, enabling mapping the response to a specific node location, and simultaneous characterization of multiple sensors with a frequency sweep. Data acquisition and processing software is used to convert spectral response into changes in temperature, pressure or other measured variables, and to map conditions at each node over time.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The proposed passive RF sensors can be embedded in structural components of space flight hardware. Multiple sensors distributed throughout structures will enable nondestructive evaluation of habitats in real time, enabling warnings and corrective actions when structural health is compromised. In addition to structural health monitoring, chemical sensors based on resistive or capacitive materials can be incorporated in the 3D antenna. Passive RF-based chemical sensors may be used for applications including leak detection and air quality monitoring.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
Electrically small 3 dimensional antennas enables a wide range of passive wireless sensor and sensor network applications. Passive sensors for temperature, pressure and chemicals can be integrated in the 3D antenna structure. RF piezoresistive sensors can be embedded in concrete structures to monitor integrity throughout its life, and specifically after earthquakes, floods and other disasters that could compromise structures. Chemical sensors based on resistive or capacitive materials can be incorporated in the 3D antenna. Sites such as abandoned mines, landfills and water systems can be monitored for key contaminants with such sensors. Monitoring of soil contaminants in remediation sites (e.g., mercury) can be done by deploying multiple sensors throughout the site and periodically interrogating the sensors for contaminant levels. Sensors can be embedded in sports helmets to monitor impact force and help prevent long term damage caused by repeated impact.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Condition Monitoring (see also Sensors)
Contact/Mechanical
Nondestructive Evaluation (NDE; NDT)
Pressure/Vacuum
Structures
Thermal

Form Generated on 04-19-17 12:59