NASA SBIR 2017 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 171 S1.04-8763
SUBTOPIC TITLE: Sensor and Detector Technology for Visible, IR, Far IR and Submillimeter
PROPOSAL TITLE: A Low Power Rad-Hard ADC for the KID Readout Electronics

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Pacific Microchip Corporation
3916 Sepulveda Boulevard, #108
Culver City, CA 90230 - 4650
(310) 683-2628

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Mr. Aliaksandr Zhankevich
alex.zh@pacificmicrochip.com
3916 Sepulveda Blvd. Ste 108
Culver City, CA 90230 - 4650
(310) 683-2628

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Ms. Ieva Ivanauskas
ieva@pacificmicrochip.com
3916 Sepulveda Boulevard, #108
Culver City, CA 90230 - 4650
(310) 683-2628 Extension :17

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 1
End: 2

Technology Available (TAV) Subtopics
Sensor and Detector Technology for Visible, IR, Far IR and Submillimeter is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
The proposal aims to develop a radiation hardened analog-to-digital converter (ADC) required for the Kinetic Inductance Detector (KID) readout electronics. KIDs are developed for photometers and spectrometers for astrophysics focal planes, and earth or planetary remote sensing instruments. ADCs employed in space based KIDs are required to combine several features: radiation hardness, low power consumption, high resolution and high-sampling rate to facilitate increase in the number of the readout tones and to reduce the size of the electronics.
The proposed SAR ADC aims to achieve a 12-bit resolution and the lowest to date reported figure of merit (FOM) at the 1GSps rate. A number of innovations will be introduced to the ADC in order to combine low power consumption (below 100mW) with the signal to noise and distortion ratio (SINAD) of at least 65dB. Tolerance to at least 4Mrads of total ionizing dose (TID) radiation and immunity to the single event effects (SEEs) will be achieved by employing radiation hardening techniques such as RHBD, RHBL and RHBS. A novel calibration technique for the capacitor mismatch will be introduced to improve linearity and increase the sampling rate. The proposed calibration technique introduced to the sub-ranging architecture with application of the asynchronous SAR logic will facilitate reduction of switching power.
Phase I work will provide the proof of feasibility of implementing the proposed ADC. Phase II will result in the silicon proven ADC prototypes being ready for commercialization in Phase III.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The proposed ADC is primarily targeted for application in the Kinetic Inductance Detector and will meet the NASA's expectations for the radiation hardened low power ADC required for the detector's readout electronics. The ADC will also be applicable for other NASA missions since it offers a flexible solution for meeting the stringent radiation tolerance and power consumption requirements that are essential in L-band and P-band radars, an advanced synthetic aperture radar (SAR), an interferometer for surface monitoring, ice topography, hydrology, oceanography. The proposed ADC can be used in digital beam forming (DBM) systems of the future radars.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The potential commercial applications for the proposed low power ADC include electronic systems employed in communication and scientific satellites, high-energy physics instruments, and medical X-ray imaging equipment. The proposed ADC can also find application in instruments and devices which require low power consumption, such as portable devices employing wireless data transmission based on WiFi, WiMAX and WiGig specifications.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Circuits (including ICs; for specific applications, see e.g., Communications, Networking & Signal Transport; Control & Monitoring, Sensors)
Sensor Nodes & Webs (see also Communications, Networking & Signal Transport)

Form Generated on 04-19-17 12:59