NASA SBIR 2016 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 16-1 S3.09-7277
SUBTOPIC TITLE: Command, Data Handling, and Electronics
PROPOSAL TITLE: Bringing 3D Memory Cubes to Space: a "Rad-Hard by Design Study" with an Open Architecture

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Irvine Sensors Corporation
3001 Red Hill Avenue, B3-108
Costa Mesa, CA 92626 - 4506
(714) 444-8700

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
James S U Yamaguchi
jyamaguchi@irvine-sensors.com
3001 Red Hill Avenue, B3-108
Costa Mesa, AK 92626 - 4506
(714) 444-8785

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Mr. Daryl L Smetana
dsmetana@irvine-sensors.com
3001 Red Hill Avenue, B3-108
Costa Mesa, CA 92626 - 4506
(714) 444-8760

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 2
End: 3

Technology Available (TAV) Subtopics
Command, Data Handling, and Electronics is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
The computing capabilities of onboard spacecraft are a major limiting factor for accomplishing many classes of future missions. Although technology development efforts are underway that will provide improvements to spacecraft CPUs, they do not address the limitations of current onboard memory systems. In addition to CPU upgrades, effective execution of data-intensive operations such as terrain relative navigation, hazard detection and avoidance, autonomous planning and scheduling, and onboard science data processing and analysis require high-bandwidth, low-latency memory systems to maximize processor usage (the memory wall) and provide rapid access to observational data captured by high-data-rate instruments (e.g., Hyperspectral Infrared Imager, Interferometric Synthetic Aperture Radar).
3D ICs, after a long wait, is now a reality. The first mainstream product is 3D memory cubes, where multiple memory tiers (4 DRAM tiers as of 2015) are vertically integrated to offer manifold improvement in size, capacity, speed, and power consumption compared with 2D counterparts. Indeed, these are the memory parts that will truly enable aforementioned missions. Unfortunately, none of these are ready for space. The purpose of this research is to investigate the challenges and opportunities in deploying 3D memory cubes into space missions.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
In order to effectively address the SWaP constraints of space hardware, it is desired to compact the electronics to as small a size as possible. Advances in the arena of 3D stacking and 3D ICs have opened a window of opportunity to integrate these types of packaging for space applications. Very high density, high bandwidth, RAD-hard reliable memory cubes would address some of the immediate needs for space applications. The one drawback is the ready availability of this type of space qualified 3D hardware.
The proposed 3D RAD-hard memory stack will be directly applicable to space electronics requiring memory intensive applications. The technology derived from this study will allow NASA to utilize this on a broader range of capabilities that can be brought to space.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
Optimization of the logic base of any memory cube type has not been available for any application. Development of the design tools to achieve better optimization of these logic bases will in turn lead to a broader application base which will benefit not only the users for space applications, but will benefit terrestrial users to help improve the efficiency of their electronics by addressing SWaP issues.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Circuits (including ICs; for specific applications, see e.g., Communications, Networking & Signal Transport; Control & Monitoring, Sensors)
Manufacturing Methods
Materials (Insulator, Semiconductor, Substrate)
Metallics
Models & Simulations (see also Testing & Evaluation)
Processing Methods
Software Tools (Analysis, Design)
Spacecraft Instrumentation & Astrionics (see also Communications; Control & Monitoring; Information Systems)

Form Generated on 04-26-16 15:14