NASA SBIR 2016 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 16-1 A1.07-7705
SUBTOPIC TITLE: Propulsion Efficiency - Turbomachinery Technology for Reduced Fuel Burn
PROPOSAL TITLE: Injector-Integrated Fuel-Air Heat Exchanger Module

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Micro Cooling Concepts, Inc.
7522 Slater Avenue, #122
Huntington Beach, CA 92647 - 7738
(714) 847-9945

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. David Underwood
daveunderwood@microcoolingconcepts.com
7522 Slater Ave, #122
Huntington Beach, CA 92647 - 7738
(714) 847-9945

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Mr. Jack Fryer
jayfryer@microcoolingconcepts.com
7522 Slater Avenue, #122
Huntington Beach, CA 92647 - 7738
(714) 847-9945

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 2
End: 3

Technology Available (TAV) Subtopics
Propulsion Efficiency - Turbomachinery Technology for Reduced Fuel Burn is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
Modern high efficiency gas turbine engines typically operate with hot section temperatures so high that metal parts in those areas need to be cooled to maintain strength and life properties. A well-established approach to this bleeds a portion of the compressor discharge air to flow through and over turbine parts. As engine compressor pressure ratios continue to increase, the temperature of this compressor discharge air also increases, to the point that the cooling air itself needs to be cooled. Micro Cooling Concepts is involved in developing a concept for a heat exchanger co-located/integrated near the point of fuel injection in order to provide cooled cooling air. The main advantages of this concept are the minimization of the amount of heated fuel between the heat exchanger and fuel injector tip such that the fire danger from leaking tubing is eliminated, and the ease of delivering cooled cooling air to the secondary air circuit. Additionally, the modular concept distributes the heat exchange function, allowing for easy replacement of an individual heat exchanger module. For this program, high temperature materials will be used for fabrication using Micro Cooling Concepts' laminated foil construction approach. This effort supports the NASA goal of improving aeropropulsive efficiency through reduced fuel burn and increased cycle temperatures, specifically by enabling very high turbine cooling effectiveness.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
A reduction in the temperature of available cooling air would provide additional heat sink, thereby enabling use of higher combustion temperatures. The benefits of such a concept include reduced fuel burn and the accompanying reduction in CO2 emissions, in alignment with NASA's goals, with accompanying minimal fire risk. This technology would be applicable to any NASA air-breathing fuel-based propulsion systems where available cooling air temperatures are currently too high to reach the desired performance goals.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The ability to provide cooled cooling air with minimal fire risk offers a compelling value proposition to turbine manufacturers and their clients. A major engine manufacturer has interest in incorporating the proposed concept into future civil and defense gas turbine engine products that currently show benefits from fuel-cooled cooling air. The designs proposed are inherently compatible with Micro Cooling Concepts' existing production line, enabling arrangements such as building the components under contract or licensing the IP to the engine manufacturer and/or their suppliers.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Air Transportation & Safety
Atmospheric Propulsion
Fuels/Propellants
Heat Exchange
Models & Simulations (see also Testing & Evaluation)
Passive Systems
Simulation & Modeling

Form Generated on 04-26-16 15:14