NASA STTR 2014 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 14-2 T5.01-9895
PHASE 1 CONTRACT NUMBER: NNX14CS53P
RESEARCH SUBTOPIC TITLE: Autonomous Communications Systems
PROPOSAL TITLE: Fully Printed Flexible 4-bit 2D (4x4) 16-Element Graphene-Based Phased Array Antenna System

SMALL BUSINESS CONCERN (SBC): RESEARCH INSTITUTION (RI):
NAME: Omega Optics, Inc. NAME: Texas State University
STREET: 8500 Shoal Creek Boulevard, Building 4, Suite 200 STREET: 601 University Drive
CITY: Austin CITY: San Marcos
STATE/ZIP: TX  78757 - 7591 STATE/ZIP: TX  78666 - 4684
PHONE: (512) 996-8833 PHONE: (512) 245-2102

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Harish Subbaraman
harish.subbaraman@omegaoptics.com
8500 Shoal Creek Boulevard, Building 4, Suite 200
Austin, TX 78757 - 7591
(512) 996-8833 Extension :6030

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Mrs Gloria Chen
gloria.chen@omegaoptics.com
8500 Shoal Creek Boulevard, Building 4, Suite 200
Austin, TX 78757 - 7591
(512) 996-8833 Extension :3020

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 3
End: 6

Technology Available (TAV) Subtopics
Autonomous Communications Systems is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
Communication technologies support all NASA space missions, among which autonomous communication technologies are extremely beneficial to future missions, including the Asteroid Redirect Mission, and human expedition to Mars and beyond. Low-cost, high gain, light-weight, and flexible active antenna systems are highly desired. In this program, we propose to develop a fully flexible ink-jet printed monolithic graphene-based high frequency PAA communication system. The superior electronic, optical, mechanical, and thermal properties offered by graphene (carrier mobility ~ 200,000cm^2/V.s; optical transparency ~ 98%; high current density ~ 10^8A/cm^2; thermal conductivity ~ 5000W/mK) is expected to significantly enhance the system features compared to the state-of-the-art flexible antenna systems., with operating frequency in excess of 100GHz expected. In Phase I, we printed graphene field-effect transistors and demonstrated a high (38:1) On/Off ratio. Graphene patch antennas were demonstrated with higher gain than silver. Results also indicated the feasibility of reducing the antenna size for a given frequency without sacrificing the gain. Finally, a 2-bit 1x2 graphene PAA was fully printed, and beam steering of a 4GHz RF signal from 0 to 42.4 degrees was demonstrated. The antenna system also showed good stability and tolerance after 5500 bending cycles. In Phase II, the graphene material inks will be further optimized for achieving high performance FETs and conductive films. A fully packaged 4-bit 2D 4x4 S-band PAA on a flexible substrate will be developed, and performance features, including gain/efficiency, frequency range, bandwidth, power consumption, and lifetime/reliability, will be characterized. Additionally, a roll-to-roll process to scale-up production will be developed, and the feasibility of large antenna array manufacturing at low-cost will be demonstrated.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
(1) Active phased-array antenna: The flexible graphene-FET is an enabling technology for the construction of high-performance large-area flexible electronics that can be monolithically integrated with deployable antennas and provide distributed control, processing, and reconfiguration functions to achieve active and smart flexible/wearable and conformal antenna systems with enhanced functionalities.
(2) High gain, frequency agile, multi-band reconfigurable antenna: The high-speed flexible electronics circuits offer embedded control and reconfiguration functions to achieve the desired gain and band-selection capabilities.
(3) High power electronics: Graphene has carrier mobility exceeding 200,000 cm^2/V.s and has a large current-density carrying capacity of ~10^8 A/cm^2. Such a large current carrying capability allows this fully-printed transistor technology to be used in NASA's high power electronics applications.

Overall, our technology will provide advanced navigation and communication in order to support several current and future NASA missions, including the asteroid redirect mission, human expedition to Mars, deep space exploration beyond low earth orbit, etc.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
Our high-frequency graphene-FET and ink-jet printing technology, apart from being valuable to NASA, can also be of commercial value to Non-NASA applications requiring ultra-sensitive and standalone devices. The commercial applications include:

1. RF identification tags;
2. Smart cards;
3. Electronic papers;
4. Large area flat panel displays and lighting;
5. Sensors;
6. Flexible large area solar cells and batteries;
7. Communication systems;

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Antennas
Autonomous Control (see also Control & Monitoring)
Circuits (including ICs; for specific applications, see e.g., Communications, Networking & Signal Transport; Control & Monitoring, Sensors)
Manufacturing Methods
Materials (Insulator, Semiconductor, Substrate)
Nanomaterials
Telemetry/Tracking (Cooperative/Noncooperative; see also Planetary Navigation, Tracking, & Telemetry)

Form Generated on 04-07-15 13:59