NASA STTR 2012 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 12-2 T12.01-9868
PHASE 1 CONTRACT NUMBER: NNX13CC70P
RESEARCH SUBTOPIC TITLE: High Temperature Materials and Sensors for Propulsion Systems
PROPOSAL TITLE: Advanced Deposition Capability for Oxidation & Corrosion Protection Coatings

SMALL BUSINESS CONCERN (SBC): RESEARCH INSTITUTION (RI):
NAME: Direct Vapor Technologies International, Inc. NAME: University of Pittsburgh
STREET: 2 Boars Head Lane STREET: 123 University Place
CITY: Charlottesville CITY: Pittsburgh
STATE/ZIP: VA  22903 - 4605 STATE/ZIP: PA  15213 - 2303
PHONE: (434) 977-1405 PHONE: (412) 624-7400

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Derek Hass
derekh@directedvapor.com
2 Boars Head Ln
Charlottesville, VA 22903 - 4605
(434) 977-1405

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Matthew Terry
mmterry@directedvapor.com
2 Boars Head Lane
Charlottesville, VA 22903 - 4605
(434) 296-3678

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 4
End: 5

Technology Available (TAV) Subtopics
High Temperature Materials and Sensors for Propulsion Systems is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?
No

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
NASA's long range goals of reducing fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing the operation temperatures of gas turbine engines. The advent of advanced alloys, coatings, cooling technologies and ceramic components has created the potential for significant increases in the hot section of these engines; however, these advances will also lead to elevated temperatures in other regions of the engine. For example, the turbine disk section would also need to operate at increasingly higher temperatures that would subject it to oxidation and hot corrosion degradation mechanisms not currently experienced. One approach to enhance the temperature capability of these systems is through the incorporation of environmental protective coatings. Research is proposed here to employ advanced coating manufacturing techniques designed to enable the affordable application of environmental protective coatings having enhanced resistance to hot corrosion and oxidation. Advanced testing approaches will be used that simulate real-world conditions and demonstrate the performance advantages of the deposited coatings. The coating systems will be applied in this work onto coupons and components to demonstrate coating capability and allow simulated engine environment testing in follow-on programs.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
This research is anticipated to result in advanced coatings for turbine disk components that provide higher temperature capability than is possible with uncoated alloys. These advancements will help turbine disk components survive the high temperature operation desired for enhanced thrust and fuel efficiency goals. These advances will potentially benefit all gas turbine engines requiring greater performance and efficiency. In addition, this research specifically supports the goals of NASA's Aeronautics Research Mission Directorate (ARMD) which seeks to expand the boundaries of aeronautical knowledge for the benefit of the nation and the broad aeronautics community and in particular NASA ARMD's Subsonic Fixed Wing Project which has a goal of conducting long term research in technologies which promote, among other things, higher performance and higher efficiency gas turbine engines.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The development of high temperature turbine disk coatings using DVTI's advanced coatings processing techniques will enable not only new environmentally-protective for use in future military and commercial aircraft platforms, but also new deposition processes to enable affordable coating application onto engines components. DVD coaters are envisioned to be small with low capital costs and tailorable volumes so that small volumes of parts can be deposited at low cost. The soft vacuum required and the high deposition rates also have the potential to facilitate low cost, assembly line like part coating for some geometries. The non-line-of-sight capabilities of this approach enable coatings to be applied onto complex components thus expanding their use. Other components which may require enhanced environmental protection, such as the below platform region of turbine blades, represent additional application areas for this technology.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Coatings/Surface Treatments
Metallics
Processing Methods

Form Generated on 07-29-14 10:30