NASA STTR 2010 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 10-1 T4.01-9890
RESEARCH SUBTOPIC TITLE: Lidar, Radar, and Passive Microwave
PROPOSAL TITLE: High Sensitivity, Radiation Hard InGaAs LIDAR Receiver for Unmanned Aircraft Systems (UAS)

SMALL BUSINESS CONCERN (SBC): RESEARCH INSTITUTION (RI):
NAME: Voxtel, Inc. NAME: Georgia Tech Applied Research Corporation
STREET: 15985 NW Schendel Avenue, Suite 200 STREET: 925 Dalney Street
CITY: Beaverton CITY: Atlanta
STATE/ZIP: OR  97006 - 6703 STATE/ZIP: GA  30332 - 0001
PHONE: (971) 223-5646 PHONE: (404) 407-6493

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Andrew Huntington
andrewh@voxtel-inc.com
15985 NW Schendel Avenue, Suite 200
Beaverton, OR 97006 - 6703
(971) 223-5646

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 4
End: 5

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
NASA has a requirement for a large-area, high-quantum-efficiency, high-throughput optical receiver for ground-, air-, and space-based LIDAR systems. A radiation-hardened direct detection analog LIDAR receiver will be developed to address this need in the proposed STTR program. The rad-hard LIDAR receiver will be based upon a high gain (M > 1000), low excess noise (k ~ 0.02) InGaAs APD technology with high quantum efficiency (>80%) between 1000-1600 nm, deployed in a 61-element segmented array with a 600-um-diameter aggregate sensitive area. Segmentation of the detector area will minimize pixel capacitance, reducing amplifier noise and enabling GHz-class bandwidth. In Phase I, the proposed hexagonal APD array will be fabricated and hybridized to a custom fanout board for operation with discrete amplifiers. In the Phase II effort, a custom low-noise readout integrated circuit will be developed to mate directly to the hexagonal array, enabling higher sensitivity and higher bandwidth due to reduced interconnect parasitics. At the end of Phase II, the APD receiver will be integrated into a LIDAR test bed by the Electro-Optical Systems Laboratory at Georgia Tech for evaluation in a 6-month measurement campaign.
Voxtel anticipates that its technology will enter the program at TRL=4, finish Phase I at TRL=5, and exit the Phase II program at TRL=7.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The proposed low-noise optical receiver technology is applicable to a large number of NASA applications, including lidar atmospheric profiling, laser ranging, ladar navigation and hazard avoidance, and free-space optical communications.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The innovation has numerous dual-use applications in US military, industrial and commercial markets, including 3D modeling and site survey, autonomous navigation, automotive cruise control and obstacle avoidance, and robotics. Military applications include navigation and targeting for manned and unmanned systems, including fixed- and rotary-winged platforms, ground-based vehicles, and weapon mounts, as well as helmet-mounted low-light-level imaging.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
3D Imaging
Detectors (see also Sensors)
Infrared
Optical/Photonic (see also Photonics)
Transmitters/Receivers


Form Generated on 09-03-10 15:17