NASA SBIR 2006 Solicitation


SUBTOPIC TITLE:Test Measurement Technology
PROPOSAL TITLE:Fiber-Optic Etalon Pressure Sensor System with High Thermal and Mechanical Stabilities

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Structured Materials Industries, Inc.
201 Circle Drive North, Suite 102/103
Piscataway, NJ 08854-3723
(732) 302-9274

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Jie   Yao
201 Circle Drive North, Suite 102/103
Piscataway, NJ  08854-3723
(732) 302-9274

TECHNICAL ABSTRACT ( Limit 2000 characters, approximately 200 words)
Atmospheric pressure sensing in particular is of critical importance to any attemp of Mars landing. Pressure sensing has traditionally always drawn high interest from the military due to its applications to high-performance military airplanes and helicopters, missiles and ballons. Aerodynamics also find its applications in civilian aviation. After over 100 years of research and development, most powered aerodynamic experiments can be accurately simulated numerically on a computer today. However, aerodynamic experiments and measurements are still needed for the input parameters to the simulation, for the final verification of results and routine monitoring of performance. As a matter of fact, precision aerodynamic measurements gain ever higher importance today than before.
There are 3 special challenges of measuring pressure on Mars: (1) the thin atmosphere requires high ensitrivity sensors; (2) the extreme temerature range; and (3) the survival of the landing impact. This proposal address them all. At home on the Earch, air pressure measurements reveal a lot of useful information about aircraft engine performance, about the air flow on aircraft wings, about the on-blade dynamic pressure of a helicopter, and about the optimal design and motion of a parachute among other things.
The unique advantage of our solution lies in its high stability against temperature variations and mechanical disturbances, rendering the proposed system rugged and robust enough for Mars landing and exploration while keeping the cost at the level of commercial off the shelf fiber-optic communications systems.
In Phase I of this program, we propose to demonstrate a bench-top system with several high-sensitivity etalon pressure sensors with high temperature and mechanical stability. In Phase II, we will develop the complete pressure sensor system using existing fiber optic components with monitoring and feedback control software.

POTENTIAL NASA COMMERCIAL APPLICATIONS ( Limit 1500 characters, approximately 150 words)
Mars atmospheric pressure sensing for landing and exploration

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS ( Limit 1500 characters, approximately 150 words)
(1) earth atmospheric pressure sensing for weather and environmental studies
(2) on-blade pressure measurement for helicopters
(3) aircraft engine health monitoring
(4) aerodynamic pressure sensing for prototyping parachutes.

NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.

Aircraft Engines
Semi-Conductors/Solid State Device Materials
Sensor Webs/Distributed Sensors

Form Printed on 09-08-06 18:19